Sign up in person at the studios for all training classes.

OH 500 Online Safety Training must be completed before attending CNC or Plasma Cutter Training and before you will be allowed to use any of the equipment in the wood shop.

 

3D Printers New Arrival Craftbot XL EER DFAB 0.602C

 

Laser Cutter Training is in the Woodshop ETC 1.222

proper attire required: long pants & closed toe shoes

Takes approximately 45 Minuets

Week of Feb. 19th, 2018

 

  • Monday at 10:00 AM, 1:00 PM, 3:00 PM
  • Tuesday at 10:00 AM, 12:00 PM, 2:00 PM
  • Wednesday at 10:00 AM, 11:00 AM, 1:00 PM, 3:00 PM
  • Thursday at 10:00 AM, 12:00 PM
  • Friday at 12:00 PM, 2:00 PM, 4:00 PM

 

CNC Mill Training (Tormach) ETC 1.222/Machineshop

Takes approximately 2 hours
OH 500 Safety Training required; proper attire required: long pants closed toe shoes

Trainings by appointment only sign sheet in ETC 1.222

Week of Feb. 19th, 2018

 

  • Friday 8:00 AM to 10:00 AM
  • Friday 10:00 AM to 12:00 PM

 

 CNC Mill ( Milltronics ) ETC 1.222 / Machineshop

Takes approximately 2 hours
OH 500 Safety Training required; proper attire required: long pants closed toe shoes

Week of Feb. 19th, 2018

 

  • Monday 10:00 AM to 12:00 PM
  • Wednesday 10:00 AM to 12:00 PM

 

Othermill Training (PCB Prototyping)  EER DFAB 0.602B

(software)

Takes approximately 1 hour

Week of Feb. 19th, 2018

Trainings by appointment only

 

  • Tuesday 4:00 PM - 5:00 PM
  • Thrusday 5:00 PM - 6:00 PM
  • Friday 11:00 AM - 12:00 PM

 

Othermill Training (Machining)  EER DFAB 0.602B

(software)

Takes approximately 2 hour

Week of Feb. 19th, 2018

Trainings by appointment only

 

  • Friday 4:00 PM - 5:30 PM

 

Sewing EER DFAB 0.602C

Trainings by appointment only

Week of Feb. 19th, 2018

Takes approximately 1 hour

 

  • Monday at 11:00 AM - 12:00 PM, 3:00 PM - 4:00 PM
  • Tuesday at 12:00 PM - 1:00 PM
  • Wednesday at 3:00 PM - 4:00 PM
  • Friday at 11:00 AM - 12:00 PM, 2:00 pm - 3:00 PM

 

Plasma Cutter ETC 1.222/Machineshop

Takes approximately 1 hour
OH 500 Safety Training required; proper attire required: long pants and closed toe shoes

Week of Feb. 19th, 2018

 Trainings by appointment only

 

  • Monday 2:00 PM - 3:00 PM
  • Tuesday 4:00 PM - 5:00 PM
  • Thursday 3:00 PM - 4:00 PM

 

Our Community and Culture

Use of the equipment in the studios is free and no experience is required. However, we do have a short set of rules that all students and faculty must observe. View the expectations

  1. The studios are open to faculty, undergraduate and graduate students from the Cockrell School of Engineering. Currently the space is not open to students from other colleges or to staff.
  2. You are expected to:
    • Clean up after yourself.
    • Insure that you and your colleagues are operating in a safe manner.
    • Be courteous, helpful, and respectful to your colleagues.
    • Failure to follow our community expectations will cause your privilege to be revoked.
  3. We do not allow the manufacturing of:
    • Weapons of any kind.
    • Production of parts for profit.
  4. You are free to test an idea, prototype it, etc. in the maker space but you need to go elsewhere to manufacture them if you decide to sell your parts.
  5. Each machine has material restrictions and training requirements that you will have to satisfy before using it. If in doubt, please ask.
  6. Intellectual property developed by a student who is not an employee of the UT Austin is owned by the student. The situation is the same if the student happens to be an employee of UT Austin and the intellectual property that is developed is outside the "course and scope" of employment.